Ford Ranger (10/2011-06/2015) Superior Engineering Superior Sway Bar Spacer Plates Front Suitable For Ford Ranger PX/PXII/Mazda BT-50 2011-2020 - SBRE-A-RAN03
Ford Ranger (10/2011-06/2015) Superior Engineering Superior Sway Bar Spacer Plates Front Suitable For Ford Ranger PX/PXII/Mazda BT-50 2011-2020 - SBRE-A-RAN03
Manufactured in Queensland, this front sway bar spacer plate kit is designed to suit Ford Ranger PX and PXII models (2011–2020), along with Mazda BT-50 Series 2 variants. While suitable for vehicles at any lift height, the primary purpose of this kit is to increase clearance between the sway bar and aftermarket 2.5 remote reservoir shocks, where the sway bar can sit very close and may otherwise contact the shock body under suspension movement.
The spacer plates reposition the factory sway bar slightly forward, creating additional space without altering overall suspension geometry. This makes them an ideal solution when fitting larger diameter shocks or remote reservoir setups, particularly in tight front-end packaging where clearance is limited.
Each plate is manufactured from heavy-duty 5mm 350gr mild steel, delivering excellent strength and rigidity to securely support the sway bar under load. A protective SA5 zinc coating provides long-term corrosion resistance, making the plates well suited to harsh Australian conditions, including mud, moisture, and off-road use. Designed as a direct bolt-on solution, this kit installs easily using factory mounting points, reducing installation time and avoiding unnecessary modification.
Key Features:
- • Suits Ford Ranger PX/PXII (2011–2020) and Mazda BT-50 Series 2 (2011–2020)
- • Suitable for all lift heights
- • Specifically designed to improve clearance to 2.5 remote reservoir shocks
- • Helps prevent sway bar contact with shock bodies
- • Manufactured from 5mm 350gr mild steel for strength and reliability
- • SA5 zinc coating for corrosion resistance
- • Simple bolt-on installation using factory mounts
This spacer kit is a practical finishing touch for suspension setups running larger shocks, helping prevent component contact while maintaining a clean, professional installation and reliable front-end performance.
Shipping Policy
Superior Engineering offer custom built suspension solutions, with unique adjustability and performance.
These kits are assembled to order to suit your requirements, with an average lead time that can vary between 1-3 weeks.
If you need a specific eta, please contact us before ordering and we will be sure to assist you.
Original: $150.58
-65%$150.58
$52.70Ford Ranger (10/2011-06/2015) Superior Engineering Superior Sway Bar Spacer Plates Front Suitable For Ford Ranger PX/PXII/Mazda BT-50 2011-2020 - SBRE-A-RAN03
Manufactured in Queensland, this front sway bar spacer plate kit is designed to suit Ford Ranger PX and PXII models (2011–2020), along with Mazda BT-50 Series 2 variants. While suitable for vehicles at any lift height, the primary purpose of this kit is to increase clearance between the sway bar and aftermarket 2.5 remote reservoir shocks, where the sway bar can sit very close and may otherwise contact the shock body under suspension movement.
The spacer plates reposition the factory sway bar slightly forward, creating additional space without altering overall suspension geometry. This makes them an ideal solution when fitting larger diameter shocks or remote reservoir setups, particularly in tight front-end packaging where clearance is limited.
Each plate is manufactured from heavy-duty 5mm 350gr mild steel, delivering excellent strength and rigidity to securely support the sway bar under load. A protective SA5 zinc coating provides long-term corrosion resistance, making the plates well suited to harsh Australian conditions, including mud, moisture, and off-road use. Designed as a direct bolt-on solution, this kit installs easily using factory mounting points, reducing installation time and avoiding unnecessary modification.
Key Features:
- • Suits Ford Ranger PX/PXII (2011–2020) and Mazda BT-50 Series 2 (2011–2020)
- • Suitable for all lift heights
- • Specifically designed to improve clearance to 2.5 remote reservoir shocks
- • Helps prevent sway bar contact with shock bodies
- • Manufactured from 5mm 350gr mild steel for strength and reliability
- • SA5 zinc coating for corrosion resistance
- • Simple bolt-on installation using factory mounts
This spacer kit is a practical finishing touch for suspension setups running larger shocks, helping prevent component contact while maintaining a clean, professional installation and reliable front-end performance.
Shipping Policy
Superior Engineering offer custom built suspension solutions, with unique adjustability and performance.
These kits are assembled to order to suit your requirements, with an average lead time that can vary between 1-3 weeks.
If you need a specific eta, please contact us before ordering and we will be sure to assist you.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Manufactured in Queensland, this front sway bar spacer plate kit is designed to suit Ford Ranger PX and PXII models (2011–2020), along with Mazda BT-50 Series 2 variants. While suitable for vehicles at any lift height, the primary purpose of this kit is to increase clearance between the sway bar and aftermarket 2.5 remote reservoir shocks, where the sway bar can sit very close and may otherwise contact the shock body under suspension movement.
The spacer plates reposition the factory sway bar slightly forward, creating additional space without altering overall suspension geometry. This makes them an ideal solution when fitting larger diameter shocks or remote reservoir setups, particularly in tight front-end packaging where clearance is limited.
Each plate is manufactured from heavy-duty 5mm 350gr mild steel, delivering excellent strength and rigidity to securely support the sway bar under load. A protective SA5 zinc coating provides long-term corrosion resistance, making the plates well suited to harsh Australian conditions, including mud, moisture, and off-road use. Designed as a direct bolt-on solution, this kit installs easily using factory mounting points, reducing installation time and avoiding unnecessary modification.
Key Features:
- • Suits Ford Ranger PX/PXII (2011–2020) and Mazda BT-50 Series 2 (2011–2020)
- • Suitable for all lift heights
- • Specifically designed to improve clearance to 2.5 remote reservoir shocks
- • Helps prevent sway bar contact with shock bodies
- • Manufactured from 5mm 350gr mild steel for strength and reliability
- • SA5 zinc coating for corrosion resistance
- • Simple bolt-on installation using factory mounts
This spacer kit is a practical finishing touch for suspension setups running larger shocks, helping prevent component contact while maintaining a clean, professional installation and reliable front-end performance.
Shipping Policy
Superior Engineering offer custom built suspension solutions, with unique adjustability and performance.
These kits are assembled to order to suit your requirements, with an average lead time that can vary between 1-3 weeks.
If you need a specific eta, please contact us before ordering and we will be sure to assist you.
